Black Gold® API 7K 5,000 10,000 X X X X X Rotary Vibrator Grade D Hose 7,500 15,000 X X X X Grade E Black Gold® API 16C Cementing Hose 10,000 15,000 X X X X X 15,00022,500 X X PAGE 2 DRILLING PRODUCTS AND SERVICES Gates Black Gold® Drilling Hoses are engineered specifically for drilling operations and are manufactured and asseled in the United States to API standards. …
•Certifiion: API 7K FSL2. Introduce: Kelly drilling hoses are big inside diameter (3" to 4" ID) high pressure flexible lines used to between the standpipe and the swivel. This flexible piping permits the kelly to be raised and lowered while drilling fluid is pumped through the drill string. The simultaneous lowering of the drill string while pumping fluid is very important to the drilling
Typical Appliion for the 2" 10,000 psi hose: Cement slurries, Drilling Mud, Hydraulic fluid, Fuel Line, High pressure Hydraulics, Bleed Off lines. Kelly Rotary Drilling Hoses for Oilfield - API 7K Approved. Vibrator hose is used in piping systems to reduce noise pollution and absorb vibration. Meets API 7K specifiions and equipped with various end fittings. Read more about Vibrator Hose
A.3 Hose end connections Clause 18.104.22.168 of API Spec 7K specifies that hose end connections may be affixed to hose couplings with line pipe threads per API Spec 5B for hose asselies with a working pressure rating of 34.5 MPa (5,000 psi) or less. For rotary hose asselies wit h
Flexible line between cementing pump manifold and cementing head. Conveys cement slurries at pressures as high as 15000psi in oil drilling and exploration works. Working Pressure: 10,000 psi. Size Range: 2” – 4”. Standard: API Spec. 7K, Monogrammed (Licence No. 7K-0456) Temp Range: II : -4°F to +212°F (-20°C to +100°C)
CEMENTING HOSE, API 7K FSL 0 & ISO 14693 Key Features High abrasion resistant tube compound - High flexibility and robustness of the hose structures - Safety factor burst/working pressure 2,25:1 - Hose compact dimensions - Outstanding resistance of the cover - Flame retardant (MSHA) and antistatic properties - High ozone, weather and fluids resistance - Standard end connections - Fig 1502
Larger hex surface with API thread, Hammer Unions, Flanges, API HUBS email- [email protected] 2" 10,000 psi w.p Oilfield Hose . High pressure 2" 10,000 psi w.p oilfield hose details below. Typical Appliion for the 2" 10,000 psi hose: Cement slurries, Drilling Mud, Hydraulic fluid, Fuel Line, High pressure Hydraulics, Bleed Off lines. USCG Fluid Power and …
WP 69,0 MPA (10000 PSI) TEST PRESS. 103,4 MPa (15000 PSI) API 7K - FSL 0 MSHA IC 40/26-20°C TO +100 °C-4 °F TO +212 °F DN 51 mm (2“) I°° MADE IN ITALY High Pressure ParLock Hose CEM69TC
API Spec 7K--ISO 14693--ABS approval Recommended For: Used as a flexible connection between the cementing pump and maniford and cementing head for conveyance of cement slurries at high pressure.
CEMENTING ROTARY HOSE W.P 10,000 psi 10K Mud/Cementing Hose 10,000 PSI W.P 15,000 PSI TEST25,000 PSI BURST •Certifiion: API 7K ISO 14693-ABS APPROVAL Material: Modified Nitrile Size: 2- 1/2 - 4 inch Imprint: Customized • Reinforcement: Multiple high strength steel cables • Cover: Modified nitrile. Black. Specially designed wear
The hose ends are a result of careful (-4°F〜+179.6°F) Standard：API Spec. 7K FSL0 | ABS Connectors：integral union Compare this product Remove from comparison tool. See the other products Luohe Letone Technology Co., Ltd. water hose LT301. for oil synthetic rubber SBR. water hose. LT301. Inner diameter: 2 in - 4 in Outer diameter: 79 mm - 156 mm Pressure: 10,000, 15,000 psi
that are attached to the hose couplings with line pipe threads in accordance with API 5B shall not be used in hose asselies with working pressures exceeding 34.5 MPa (5000 psi). For
High Pressure Cement Hose (API Spec 7K / FSL 0) Tube: CR Rubber Smooth Bore Reinforcement: High Strength Steel Cable Cover: Neoprene based rubber for anti-flaming, wear resistance, oil resistance, ozone & ageing resistance, UV resistance, designed for marine environment Working temp: -25 to +100° C Length: Maximum length: 70m Length tolerance: Length up to 6.4m, with tolerance ± 64 mm
Production length tolerance: +/- 64 mm up to 6.4 m hose length, or +/- 1% in psi * WP mm m kg/m I.D. Working Pressure Test Safety factor O.D. Hose Body R Storage R Operation Weight of Hose Body APPLIIONS: • Cementing hose • Acidizing hose API Spec. 7K FSL0 - ISO 14693 / API Monogram 2 5000 10000 2.5 102 0.6 0.7 12.4 2 10000 15000 2
Rotary drilling hose is used to convey drilling liquids from the top of mud standpipe to the rotary swivel. Operating pressure up to 4000psi. BOP control line manufactured as API 16D has 1/4inch to 2inch bore size and 5000 psi operating pressure and free of flame temperature of 1300°F for 5 minutes.
Available hose asselies include: Rotary Drilling Hoses to API 7K psi. Size: 2” to 4” with Working Pressure from 5,000 (Grade D) – 7,500 psi (Grade E). DNV & ABS Type Approval is available. Cementing Hoses are also available as 2” & 3" 10,000 psi. For 15,000 psi …
Black Gold® API 7K FSL1 Rotary Drilling/Vibrator Hose Gates Black Gold® rotary hoses handle working pressures as high as 7,500 psi while remaining flexible enough to move up and down with the top drive. The hose cover withstands gouging, harsh weather, oil and other corrosive fluids common at drilling sites. Stainless steel armor is available upon request. Temperature Range: -4°F to 180°F
API 7K LICENSED, CERTIFIE No 7K-0014 FSL0 Appliion: Cementing and Acidizing Service Working Temperature: -20°F to 250°F Max Length: 200 ft. Note: Hose must be flushed with water after acidizing to a neutral pH . API 7K LICENSED, CERTIFIE No 7K-0014 FSL0 Appliion: * Cementing and Acidizing Service * Working Temperature: -20°F to 250°F * Max Length: 200 ft. Note: Hose must …
Mud Hose/Rotary Hose/Vibrator Hose Standard: API Spec 7K FSL 2 API Monogram No: 7K-0106 Hose structure Tube: Reinforcement: Cover: NBR Smooth Bore High Strength Steel Cable Neoprene based rubber for anti-flaming, wear resistance, oil resistance, ozone & ageing resistance, UV resistance, designed for marine environment. Working temp: -25 to + 100° C Length: Maximum length: 70m …
22/3/2018· API-7K FSL2 API-7K FSL2 API-7K FSL0 Working pressure: 5000 psi Burst pressure: 12500 psi Temperature range: -20° C +100° C (-4° F +212° F) Flexible Specifiion Level: 2 Diameters: From 2” to 4” Note: Swaged hose assely with most common integral one piece Hammer Unions, flanges and male API terminations. Working pressure: 7500 psi Burst pressure: 18750 psi Temperature …
Mud cement hoses, also named rotary hose, kelly hose, high pressure drilling hose are used to convey high pressure drilling liquids. PME mud cement hose 4 inch WP 10000 Psi, Test 15000 Psi, Grade F is manufactured with the highest quality material, ends with API male fittings, threaded, butt welded hammer unions, and API flanges.
28/5/2019· The hose can be used be for multiple products such as pumping cement, HCL, Nitrogen, Methanol, etc at 10,000 psi and Flexiflo Corp is the only OEM certified and authorized asseler of these hoses. Parker certify the technicians and recently it was mandatory for the certified distributors to get the DNV Type Approval done locally and we took up the challenge and came out with flying colours.
Rotary Drilling Hose / Decoking Hose. 0.00. API 7K LICENSED, CERTIFIE N o 7K-0014 FSL1 & FSL2. 4,000, 5,000 and 7,500 PSI. This high-quality decoking hose provides many years of trouble-free service. Appliion: Mud, Mud Booster/Jumper, Decoking, Motion Compensator Hoses. Working Temperature: -20°F to 250°F. Max Length: 200 ft.
API Spec 7K, SY/T5469 Size Internal Diameter Class Minimum Bend Radius Working Pressure Test Pressure inch mm mm PSI kPa bar PSI kPa bar 2’’ 51 A 800 1500 10342 103.42 3000 20684 206.84 2’’ 51 B 800 2000 13789 137.89 4000 27579 275.79 2’’ 51 C 850 4000 27579 275.79 5000 34473 344.73 2’’ 51 D 850 5000 34473 344.73 8000 55158 551.58
Midwest Hose Rotary, Cement, and BOP hose are specifically manufactured, asseled, and stringently tested to meet the requirements of API 7K FSL 0, FSL 1, and FSL 2. Midwest Hose offers 2” – 4” drilling and cementing hoses from 5000 – 10,000 psi.
API 7K Monogrammed 24 2 Hose, 2" I.D x 5000 psi WP ID: 2" Length: 3 meter : Working Pressure: 5000 psi . Test Pressure : 10000 psi . Service: Standard . Temperature: -20°C~121°C . Flexible Specifiion Level: FSL-2 . Termination A: Integral 2" 1502 Male H/Union . Termination B: Integral 2" 1502 H/Union . Two-eye safety slingsone at each end . API 7K Monogrammed 13. lobal Drilling